It is different from the general mixing furnace, generally should meet the following three requirements: 1. It can control the temperature of the liquid metal during drawing, so that the molten metal is always maintained within a certain temperature range, so as to ensure the normal production of continuous casting and the best quality of the ingot.Vacuum Heat Treatment Furnace For Molds 2. The furnace is required to vibrate back and forth within a certain range. For certain alloys, horizontal continuous casting must be vibrated to obtain good ingot surface quality and crystalline structure. The amplitude range is 0-15 mm, and the vibration frequency is 0-200 times per minute.Copper wire workshop design and vacuum heat treatment 3. The front of the furnace body should be easy to install the mold, so that the liquid metal in the furnace can directly enter the mold in a short distance.Casting Vacuum Heat Treatment Process Therefore, the holding furnace is made into a horizontal power frequency induction furnace with an iron core with a slightly square body. This kind of furnace can be tilted and rotated and cannot be tilted. Although the structure of the tiltable furnace is more complicated , but can prevent the danger of liquid metal shock during leakage.The Function And The Production Of Ceramic Bulletproof Vest
top of page
bottom of page
Futemax This is exactly what I needed to read today. Your perspective is refreshing and thought-provoking. Thank you for sharing!